Accessories

These new remote releases from Opteka allows the camera to be released from a distance. All electronic, just plug-in and use. Has a momentary release, as well as a locking position for time releases. - Opteka Remote Release for Digital SLR Cameras - Allows the camera to be released from a distance of up to 36 inches - Half-press focuses, full press releases the shutter - All Electronic - no batteries needed! - Brand New, Sealed

With an Opteka 5 piece Lens/Camera cleaning kit it contains everything you need to maintain your Digital Camera! It cleans hard to reach lenses, protects battery contacts, and is very easy and safe to use. Works excellent for lenses, cameras, filters, and it also easily cleans LCD panels. The lens cleaning solution is specially made for removing oil and dirt. - Cleans lenses, camera Lenses, and filters - Lens cleaning solution - made specially for removing oil and dirt - Double pressed micro-fiber cleaning cloth - Cleaning tissues - Q-Tips - Blower brush

The Opteka SSC-20 sensor swabs are pre-moistened with a Tin Oxide cleaning solution, which leaves no visible residue and is specifically designed for CCD/CMOS chips. It is also recommended for other optical and imaging surfaces. Pre-moistened with a Tin Oxide soultion Designed to clean CCD/CMOS chips and other optical and imaging surfaces Leaves no visible residue Easy cleaning process This product is safe and will not cause any damage to your sensor

The Opteka SLK-50 SLR/CCD/CMOS Cleaning Kit contains all the essential cleaning tools for your SLR Camera. Kit Includes: SCK-1 Dry Sensor Swabs (10 PACK) - Lint free dry swabs designed for cleaning CCD/CMOS chips. May be used with the SCK-5. SCK-2 Alcohol Pads (3 PACK) - Safe for use on monochrome CCD's, scanners, optical mirrors and other sensitive electronic and photographic image forming surfaces. SCK-3 Ultra-soft Lint-free Cleaning Pads (10 PACK) - Applicable for any cleaning need. May be used with the SCK-5. SCK-4 Pre-moistened Sensor Swabs (5 PACK) - Pre-moistened swabs designed for cleaning CCD/CMOS chips. SCK-5 Tin Oxide CCD/Camera Cleaning Fluid (1 OZ.) - Leaves now visible residue and is safe for CCD/CMOS chips, optical and imaging surfaces. May be used in combination with the SCK-1 & SCK-3.

The Opteka SSC-10 TAC cleaning kit is designed to remove dust build up from CMOS & CCD SLR sensors using uniquely designed polyurethane stylus soft tips. Kit includes (1) large tip stylus, (1) small tip stylus, and (1) dust removal pad. Safely removes dust from CMOS & CCD SLR camera sensors Compatible with most Digital SLR Cameras Uniquely designed polyurethane stylus soft tips Washes easily; Reusable Kit includes (1) large tip stylus, (1) small tip stylus, and (1) dust removal pad

The Opteka RC-7 Remote Control makes taking group photos easy by allowing you to take pictures away from the camera. The RC-7 allows the selection of either a 2-second shutter delay or instant shutter release. This miniature infrared transmitter operates at ranges of up to 5m/16.4 ft., and may also be used to activate mirror-lock and bulb-shutter functions. - Wireless camera operation for digital SLR's and most film cameras - Allows for shutter release up to 16 feet - Instant or 2-second shutter release delay - Makes group photos easy - Battery included, Typical Battery Life - up to 2 years, 10,000 exposures - Dimensions: 2 x 1 x 0.2 inches ; 3.2 ounces

The Opteka Timer Remote Control Set combines many features into one with a self-timer, interval timer, long-exposure timer, and exposure count setting feature. The timer can be set anywhere from 1 sec. to 99 hrs., 59 min., 59 sec. A new dial enables you to easily enter the numeric settings with a single thumb. The LCD panel can also be illuminated, and the alert sound can be turned on/off. - 4 Modes: Shutter Release Timer (0s-99h59m59s), Exposure Timer (0s-99h59m59s), Interval Timer (Time between shots) (0s-99h59m59s), Total Number of Shots (1-399) - Backlit LCD Screen, 3 Foot Cord - 6" X 1.5" X 0.70"; 3.70 Oz - Operates on two AAA Batteries (Included) - 1 Year Warranty

These new remote releases from Opteka allows the camera to be released from a distance. All electronic, just plug-in and use. Has a momentary release, as well as a locking position for time releases. - Opteka Remote Release for Digital SLR Cameras - Allows the camera to be released from a distance of up to 10 feet - Half-press focuses, full press releases the shutter - All Electronic - no batteries needed! - Brand New, Sealed

The new Opteka RC-4 remote control makes taking group photos easy by allowing you to take pictures away from the camera. The RC-4 allows the selection of either a 2-second shutter delay or instant shutter release. The RC-4 is completely dedicated to the Canon EOS Digital Rebel, XT, XTi, XSi, T1i, T2i, T3i, Elan 7ne, 7n, 7e, T2, K2, 5D Mark II, 7D, 60D, 300D, 350D, 400D, 450D, 500D, 550D. - Wireless camera operation for select Canon EOS Digital SLR Cameras - Allows for shutter release up to 16 feet - Instant or 2-second shutter release delay - Makes group photos easy - Battery included, Typical Battery Life - up to 2 years, 10,000 exposures - Dimensions: 2 x 1 x 0.2 inches ; 3.2 ounces

The new Opteka RC-6 remote control makes taking group photos easy by allowing you to take pictures away from the camera. The RC-6 allows the selection of either a 2-second shutter delay or instant shutter release. The RC-6 is completely dedicated to the Olympus EVOLT E-620, E-600, E-520, E-510, E-500, E-450, E-420, E-410, E-400, E-330, E-300, E-30, & E-3 Digital SLR Cameras. - Wireless camera operation for select Olympus Digital Cameras - Allows for shutter release up to 16 feet - Instant or 2-second shutter release delay - Makes group photos easy - Battery included, Typical Battery Life - up to 2 years, 10,000 exposures - Dimensions: 2 x 1 x 0.2 inches ; 3.2 ounces Full compatibility list: E-VOLT: E1, E3, E10, E20, E30, E300, E330, E400, E410, E420, E500, E510, E520, E600, E620, E2100, & E2500. Stylus Digital: Stylus 800, Stylus 500, Stylus 410, Stylus 400, & Stylus 300. Ultra Zoom: D40 Zoom, C8080, C770 C755, C750, C730, C7070, C7000, C60, C5060, C5050, C5000, C50, C4040, C3040, C3030, C3000, C2500L, C2100, C2040, C2020, & C2000.

The Opteka Remote Control Set is a 16 channel Radio Remote for operating digital cameras at distances up to 320ft (100m). The Opteka Remote Control Set consists of two parts: a receiver/trigger that connects to the camera's cable release socket, and a separate sender. The remote can have a range of up to 100m under optimal conditions, and it features a two-position switch, for focusing operation or shutter release. Batteries included for instant usage. - Opteka Remote Release for Digital SLR Cameras - Allows the camera to be released from a distance of up to 320 feet! - Half-press focuses, full press releases the shutter - Batteries for receiver and trigger Included - Brand New, Sealed

The Opteka RFT-40 adds flexibility and versatility to your shooting style. Shooting wirelessly allows you to do things other than standing behind the camera i.e. you can interact with a model, experiment with different shooting perspectives or duck out of sight of elusive wildlife - all this and more without missing a moment. The RFT-40 operates via the reliable FSK 2.4 GHz frequency for a range up to 650' (200m). A direct line of sight is not required for its operation; radio waves can pass through objects such as walls or windows. The shutter release functions will allow you to autofocus, utilize single image or continuous shooting, use long exposures (bulb mode), or set a four second timer delay. The flash triggering functionality gives you the freedom to manage your lighting both indoors or outdoors, and you can purchase additional receivers to fire multiple portable or studio lights simultaneously. Frequency 2.4 GHz FSK Range 650 feet (200 meters) Channels 16 Synchronization 1/250 sec Shutter Release Mode Half-press to focus; Full-press to shoot Input Terminal Connector 3.5mm Output Terminal Connector 2.5mm Dimensions Transmitter: 1.4 x 3.3 x 1.2"; Receiver: 1.6 x 2 x 1.2" Weight 2.2 oz (65g) Warranty 1 Year Opteka Power Supply Transmitter: CR2 26V/3A; Receiver: 2x AAA 12V/3A (Batteries are included)

The new Opteka RC-2 remote control makes taking group photos easy by allowing you to take pictures away from the camera. The RC-2 allows the selection of either a 2-second shutter delay or instant shutter release. The RC-2 is completely dedicated to the Nikon D40, D40x, D50, D60, D70, D70s, D80, D90, D3000, D5000 & D7000 Digital SLR Cameras. - Wireless camera operation for select Nikon Digital SLR Cameras - Allows for shutter release up to 16 feet - Instant or 2-second shutter release delay - Makes group photos easy - Battery included, Typical Battery Life - up to 2 years, 10,000 exposures - Dimensions: 2 x 1 x 0.2 inches ; 3.2 ounces

The new Opteka RC-3 remote control makes taking group photos easy by allowing you to take pictures away from the camera. The RC-3 allows the selection of either a 2-second shutter delay or instant shutter release. The RC-3 is completely dedicated to the Sony Alpha A33, A55, NEX-5, A230, A330, A380, A390, A450, A500, A550, A560, A580, A700, A850 & A900. - Wireless camera operation for select Sony Alpha Digital SLR Cameras - Allows for shutter release up to 16 feet - Instant or 2-second shutter release delay - Makes group photos easy - Battery included, Typical Battery Life - up to 2 years, 10,000 exposures - Dimensions: 2 x 1 x 0.2 inches ; 3.2 ounces

The Opteka GPN-1 Geotagging GPS & Remote Shutter Release allows you to "geotag" your images with valuable information such as latitude, longitude, altitude and time information. For those who are on the go such as outdoor photographers, nature shooters, climbers, sports enthusiasts, news hounds, surveillance people, real estate agents and many more, this item provides a valuable way to accurately document when and where you shot a specific photo. A bonus remote cord (included) plugs right into the GPN-1 and allows the shutter to be released from a distance. Specifications Supported Cameras Nikon D3X, D3S, D3, D700, D300S, D300, D2x, D2XS, D2HS, D200, D90, D7000, D5000, D5100, D3100 GPS Acquisition Times 30-60 seconds Update Rate Once per second GPS Accuracy 10m/33 ft. Operating Temperature 0C-40C 32F-104F Accessories Remote Cable (included) Dimensions (LxHxD) (Main unit only) 1.8 x 1.3 x 0.5 (46 x 33 x 13mm) Weight (Main unit only) 0.6 oz (15g)

The Opteka Wireless Radio Remote Control Set is a 16 channel Radio Remote for releasing your camera's shutter at distances up to 650 feet (200m). The Opteka Remote Control Set consists of two parts: a receiver/trigger that connects to the camera's cable release socket, and a separate sender. The remote can have a range of up to 650' (200m) under optimal conditions, and it features a two-position switch, half-press for focusing operation or full press for shutter release. The remote features single shot/bulb or continuous shutter release modes. ~ Range up to 200m (650ft.) without obstacles ~ Can activate auto focus, release shutter, activate continuous drive mode or keep the shutter open for bulb photography as well ~ Shutter button can half-press for focusing operation or full press for shutter release ~ Batteries included for instant usage ~ 1 Year Warranty Channels 16 Range 650 feet (200 meters) Frequency 433 MHz Shutter Modes Single Shot 2-Second Delay Bulb AF Confirmation LED 2 color focus confirmation LED's Power Source Transmitter: 1 x 23A 12V battery (included) Receiver: 1 x CR2 3V battery (included) Battery Life Transmitter: up to 3 years Receiver: approx. 20,000 triggers Dimensions Transmitter: 3.9 X 1.5 X 0.6" (10 X 3.8 X 1.5cm) Receiver: 1.8 X 1.5 X 0.75" (4.5 X 3.8 X 1.9cm) Warranty 1 Year Limited

The Opteka X-GRIP handle can be used by both a professional or amateur user. This incredible support offers stability and control. The hot shoe attachment enables you to add a video light or flash. Extremely useful product for skateboarding and other extreme sports. Fits most compact cameras and camcorders with a standard 1/4-20 thread Cushioned NBR padded handle alleviates the stress of lengthy filming High-grade ABS impact-absorbent plastic Non-slip rubber rails Shoe mount (removable) for video lights, flashes, or microphones Max camera height: 4.75" (120mm) Dimensions: 8.25" X 9.75" X 3.50" HxLxW (209mm X 247mm X 89mm) Weight: 12.2 oz (345g) without devices 1 Year Opteka Warranty

The Opteka X-GRIP handle can be used by both a professional or amateur user. This incredible support offers stability and control. The hot shoe attachment enables you to add a video light or flash. Extremely useful product for skateboarding and other extreme sports. Fits most cameras and camcorders with a standard 1/4-20 thread Cushioned NBR padded handle alleviates the stress of lengthy filming High-grade ABS impact-absorbent plastic Non-slip rubber rails Shoe mount (removable) for video lights, flashes, or microphones Max camera height: 6.75" (171mm) Dimensions: 10" X 13.5" X 3.6" HxLxW (254mm X 343mm X 91mm) Weight: 15.6 oz (440g) without devices 1 Year Opteka Warranty

The Opteka Video Shoulder Support System will allow any filmmaker to achieve professional results. Constructed of an extremely high quality aluminum and stainless steel material, the shoulder support system is designed to accommodate small digital SLR cameras, all the way up to prosumer camcorders. Basically every element of the Opteka Video Shoulder Support System is adjustable to align and balance your rig. Almost all adjustments are made using thumbscrews, and can be further tightened with a wrench for added confidence. The camera, and shoulder pad can all be adjusted to fit your body (right or left shoulder) and shooting style. It is the perfect production tool for amateur/professional filmmakers or videographers. No matter what is being recorded, the user will always know that the steadiest possible image is being captured. Complete hands-free solution Simple to use, sets up in seconds Heavy-duty aluminum and stainless steel construction Lightweight, portable, and safely supports up to 20 lbs (9kg) Lowers fatigue while reducing vibration and shaking 1" foam pad on shoulder to stay comfortable while you shoot Customizable by adding brackets for microphones and lights Removable grip may be used stand alone 1 Year Warranty Weight: 2.3 lbs Dimensions: 18" X 8" X 4.5" Materials: Aluminum, Stainless Steel, Foam

The Opteka HG-5 handgrip stabilizer is the ideal accessory to shoot or record smooth and stable shots with your camera. Easily mounted to any camera, the HG-5's non-slip finish provides a sturdy grip along with a greater range of motion. With the quick release, your camera can even detach from the HG-5 in seconds. The quick release plate is so small it can stay on the bottom of your camera. It can also be mounted to a tripod for additional extension and grip. It is even compatible with spotting scopes and binoculars that are tripod adaptable. Lightweight (2.3oz) and portable pistol-style grip Shoots smooth and stable professional video Compatible with any camera or camcorder Quick release plate 1/4 20" standard tripod thread on the bottom Load Capacity 5 lbs (2.26 kg) Height 4.75" (12 cm) Quick Release Yes Tripod Mounting Threads Top: 1/4"-20 Male; Bottom: 1/4"-20 Female Weight 2.3 oz (65 g)

The Opteka GLD-200 Camera Slider is designed to give you the ability to create Hollywood-quality production shots without over-extending your budget. Featuring heavy-duty anodized aluminum construction, self-lubricating glide rails, spirit level & tension adjustment, the GLD-200 Slider gives you the best value for your dollar. The GLD-200 Slider can be attached directly to a tripod and may also be used standalone with the included feet, which raises your camera setup approximately 2" off the ground. Features 23.6" (60cm) Long Track Sets up in minutes Self-lubricating rails Tension adjustment/locking knob Spirit Level Use on a tripod or on a flat surface with included feet Creates Hollywood-quality production shots Anodized aluminum construction Track Length 23.6" (60cm) Materials Anodized Aluminum Compatible Thread Sizes 1/4" and 3/8" Tripod Compatible Yes Swivel/Pan Head Compatible Yes Spirit Level Yes Dimensions (LxWxH) 23.6" x 3.5" x 2.7" (60cm x 9cm x 7cm) Weight 1.9 lbs (862g)

The Opteka GLD-400 Camera Slider is designed to give you the ability to create Hollywood-quality production shots without over-extending your budget. Featuring heavy-duty anodized aluminum construction, self-lubricating glide rails, spirit level & tension adjustment, the GLD-400 Slider gives you the best value for your dollar. The GLD-400 Slider can be attached directly to a tripod and may also be used standalone with the included feet, which raises your camera setup approximately 2" off the ground. 47.2" (120cm) Long Track Sets up in minutes Self-lubricating rails Tension adjustment/locking knob Spirit Level Use on a tripod or on a flat surface with included feet Creates Hollywood-quality production shots Anodized aluminum construction Track Length 47.2" (120cm) Materials Anodized Aluminum Compatible Thread Sizes 1/4" and 3/8" Tripod Compatible Yes Swivel/Pan Head Compatible Yes Spirit Level Yes Dimensions (LxWxH) 47.2" x 3.5" x 2.7" (120cm x 9cm x 7cm) Weight 3.18 lbs (1.44 kg)

The Opteka HG-1 HandGrip Stabilization System is a video stabilization device designed specifically for point-and-shoots, Digital SLR cameras and compact camcorders. The Handgrip keeps your hands off the camera and allows you to capture videos from difficult angles. Features Comfort foam padded handle Heavy-duty aluminum construction Keeps your hands off the camera Stabilizes your video Makes shooting from difficult angles easy The HG-1 is the same handle included with the CXS-1 video rig, add this handle to the CXS-1 for a dual-handle solution Color Black; Red Materials Aluminum; Foam Padded Thread Size 1/4 Dimensions (HxLxW) 6.25 x 1.5 x 1.5 (15.8cm x 3.8cm x 3.8cm) Weight 8.4oz (240g)

The Opteka CXSB-1 is two-part shoulder strap support system belt designed to fit the CXS-1 & CXS-2 video shoulder support rigs. The CXSB-1's fully padded design alleviates stress on your shoulder and provides extra security for your kit. Using the CXSB-1 also transforms your CXS-1 or CXS-2 into a hands-free rig (adding the CBW-1 counter balance weight is also recommended to fortify the hands-free option). Padded design alleviates stress on your shoulder and provides extra security Transforms the CXS-1 & CXS-2 in to a hands-free rig (CBW-1 counter balance weight recommended) May be used with or without the CBW-1 counter balance weight 1 Year Warranty